Material table testing machinesZwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
Material table testing machines
Zwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۷٬۵۰۰
وضعیت
کارکرده
موقعیت
Borken 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۷٬۵۰۰
- موقعیت:
- Einsteinstraße 8a, 46325 Borken, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20951877
- شماره مرجع:
- 24974
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۵.۱۰.۱۴۰۴
توضیحات
Zwick / Roell
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Rated test force: 20 kN
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Kedpfx Aex Up Igoazsll
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Rated test force: 20 kN
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Kedpfx Aex Up Igoazsll
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+49 2861 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است





















