Brush deburring machineZIMMER
GRATMAXX
Brush deburring machine
ZIMMER
GRATMAXX
وضعیت
جدید
موقعیت
Böblingen 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A3975524
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۶.۰۱.۱۴۰۴
توضیحات
GRATMAXX Bürstentgratmaschine
The machine is suitable for the deburring of edges on:
Round tubes, square tube, rectangular tube, full materials, profiles of all kinds.
Materials:
Steel non-ferrous metals, plastics, hard or soft.
Work flow:
After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush.
The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5.
Technical data:
Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable)
Min. workpiece-Ø: 5 mm
Maximum work piece-Ø: 100 mm (150 mm)
Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35
Power: 3,0 KW
Power: 3.5 KW
Operating voltage: 3 ~, 400Volt, 50 Hz
Rated current: 8A
Back-up fuse: max 16A
Control voltage: 24V/DC
Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm
Altitude: 1.382 mm
Working height: approx. 1.080 mm
Depth: 1,209 mm
Gusdpfjd Hmnfox Acyjh
Weight: 310 kg
Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A)
Scope of delivery:
Rotary head Bürstentgratmaschine GratMaxx with power socket without cable
Workpiece support table with adjustable angle stop and
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine is suitable for the deburring of edges on:
Round tubes, square tube, rectangular tube, full materials, profiles of all kinds.
Materials:
Steel non-ferrous metals, plastics, hard or soft.
Work flow:
After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush.
The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5.
Technical data:
Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable)
Min. workpiece-Ø: 5 mm
Maximum work piece-Ø: 100 mm (150 mm)
Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35
Power: 3,0 KW
Power: 3.5 KW
Operating voltage: 3 ~, 400Volt, 50 Hz
Rated current: 8A
Back-up fuse: max 16A
Control voltage: 24V/DC
Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm
Altitude: 1.382 mm
Working height: approx. 1.080 mm
Depth: 1,209 mm
Gusdpfjd Hmnfox Acyjh
Weight: 310 kg
Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A)
Scope of delivery:
Rotary head Bürstentgratmaschine GratMaxx with power socket without cable
Workpiece support table with adjustable angle stop and
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2002
ارسال درخواست
تلفن & فکس
+49 7033 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است