Door Pressing System WILD (1998)

WILD

- Lengths: 1,800 - 2,300 mm
- Widths: 500 - 1,300 mm
- Thicknesses: 35 / 40 / 44 mm

Door pressing system
Manufacturer: Wild
Year of manufacture: 1998
For door dimensions:
- Lengths: 1,800 - 2,300 mm
- Widths: 500 - 1,300 mm
- Thicknesses: 35 / 40 / 44 mm

Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station
Section 1 consists of:
- Gantry loading system
- Angle transfer with longitudinal and cross saws
- Loading and feeding of the longitudinal and transverse frame parts from magazines
- Longitudinal cutting station for the longitudinal frame parts
- Connecting station of the frame parts with the door panel core. With clamping devices
- Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard

Section 2 consists of:
- Loading of the hardboard
- Brush cleaning machine
- Hardener application machine from below
- Glue application machine from below
- Roller conveyor
Godpfozuzgrjx Aqtouh
- Angle transfer for the lower hardboard
- Vacuum reversing device for the upper hardboard
- Automatic facing station for hardboard and door panel cores
- 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other
- Both presses are loaded at the infeed with 1 shuttle loading basket
- Both presses are unloaded at the outfeed with 1 shuttle unloading basket
- Angle transfer to the infeed into a hedgehog buffer
- Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station
- One-sided vacuum stacking with protective plate space

Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.