Coordinate measuring machine

Werth Messtechnik GmbH Tomoscope XS 160

Werth Messtechnik Tomoscope XS 160
Ijdpoxbgclefx Acyjbc

Source: werth.de/en/products/devices/d/computed-tomography/device/tomosc ope-xs.html

"Measurements using X-ray tomography for production and inspection room
The transmission tube—used here for the first time in a monoblock design—enables a small focal spot even at high tube power, allowing for rapid measurements at high resolution. The monoblock design for the tube, generator, and vacuum system has also been implemented as an open construction for the first time. This results in extended maintenance intervals and a theoretically unlimited service life. Application areas include 3D measurement of connectors, plastic housings and covers, 3D printed workpieces, packaging materials, PET bottles and preforms. The TomoScope® XS (utility model) can also be used for tool correction. Measurements taken on the workpiece allow for verification of both tool functionality and wear. Workpieces can be inspected for indications of tool breakage and burr formation, for instance."

"Additional advantages
- The transmission tube’s monoblock design results in a small focal spot even at high tube voltage, enabling measurements up to five times faster than conventional CT systems, with high resolution
- The TomoScope® XS uniquely combines features from multiple device classes
- The X-ray source unites the benefits of both closed and open microfocus X-ray tubes
- Downtime and operating costs are minimized
- Rapid return on investment due to low acquisition costs
- Local subvoxel computation reduces probing deviations
- OnTheFly tomography and real-time reconstruction enable fast measurements
- Future-proof design for easy on-site upgrades of tube voltage and power—up to 160 kV or 80 W
- Built as a fully shielded device compliant with radiation protection regulations
- Standards-compliant calibration according to VDI 2617 for reliable and traceable measurement results, with DAkkS certificate option available"

"Technical data
Design:
3D CNC coordinate measuring machine with computed tomography sensor technology

Measuring range:
Max. workpiece dimensions D = 277 mm / L = 149 mm (depending on aspect ratio of the workpieces)

Accuracy:
Permissible length measurement deviation up to 4.5 µm"

+++++

Application: Medical Device Manufacturer

The system was inspected annually and approved according to §88 of the German Radiation Protection Ordinance (StrlSchV). Due to the low number of special production parts, the machine saw very little use overall.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.