Copy lathe knurling milling machineWEMA
Joker 7000 CD
Copy lathe knurling milling machine
WEMA
Joker 7000 CD
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۶٬۹۰۰
سال ساخت
۲۰۰۲
وضعیت
کارکرده
موقعیت
Langenfeld (Rheinland) 

اطلاعات پایه
- نام دستگاه:
- Copy lathe knurling milling machine
- تولید کننده:
- WEMA
- مدل:
- Joker 7000 CD
- سال ساخت:
- ۲۰۰۲
- وضعیت:
- بسیار خوب (کارکرده)
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۶٬۹۰۰
- موقعیت:
- Herzogstrasse 10a, 40764 Langenfeld, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A22169947
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۱.۰۹.۱۴۰۵
توضیحات
High-quality copy lathe, wood lathe with milling unit, PLC-controlled.
A video of the machine in operation can be sent upon request.
PLC-controlled wood copy lathe for turning and milling.
The machine has two controlled axes: the longitudinal axis and the rotary axis.
Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling.
Several programs can be stored for turning and milling operations.
Hydraulic copy sensing of a pattern or template.
The roughing and copy tools are equipped with fine adjustments.
Template adjustment can be made from the front and rear via fine-threaded spindles.
The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces.
Drive motor 400V / 3kW with electric motor brake.
Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter.
Speed stage 1: 200 - 2000 RPM
Speed stage 2: 350 - 3400 RPM
Knjdpfx Akjzfwm Neijd
Distance between centers approx. 1550mm
Copy length with steady rest approx. 1350mm
Bed length approx. 2100mm
Feed rate continuously adjustable, rapid traverse with safety end stop.
Hydraulic copy slide with V-turning tool.
Spindle with M33 thread and MK3 internal taper.
Tailstock MK3 and with quick-release device.
Numerous accessories:
Ring steady rest with front turning tool and insert aid.
Four-jaw steady rest.
Four-jaw chuck 125mm.
Copy tools, center punches, hexagonal drivers, etc.
Milling unit with 3kW motor for mounting on the copy slide.
5 milling heads available, only the 16mm collet is missing.
CE marking
Operating manual
V-belt new
Original paint, only a few spots retouched.
Very good condition from a small carpentry shop.
The machine apparently was not used to produce large quantities.
Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg.
The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
A video of the machine in operation can be sent upon request.
PLC-controlled wood copy lathe for turning and milling.
The machine has two controlled axes: the longitudinal axis and the rotary axis.
Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling.
Several programs can be stored for turning and milling operations.
Hydraulic copy sensing of a pattern or template.
The roughing and copy tools are equipped with fine adjustments.
Template adjustment can be made from the front and rear via fine-threaded spindles.
The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces.
Drive motor 400V / 3kW with electric motor brake.
Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter.
Speed stage 1: 200 - 2000 RPM
Speed stage 2: 350 - 3400 RPM
Knjdpfx Akjzfwm Neijd
Distance between centers approx. 1550mm
Copy length with steady rest approx. 1350mm
Bed length approx. 2100mm
Feed rate continuously adjustable, rapid traverse with safety end stop.
Hydraulic copy slide with V-turning tool.
Spindle with M33 thread and MK3 internal taper.
Tailstock MK3 and with quick-release device.
Numerous accessories:
Ring steady rest with front turning tool and insert aid.
Four-jaw steady rest.
Four-jaw chuck 125mm.
Copy tools, center punches, hexagonal drivers, etc.
Milling unit with 3kW motor for mounting on the copy slide.
5 milling heads available, only the 16mm collet is missing.
CE marking
Operating manual
V-belt new
Original paint, only a few spots retouched.
Very good condition from a small carpentry shop.
The machine apparently was not used to produce large quantities.
Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg.
The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 2173 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Schwanberg
۳٬۶۱۹ km
MAKADB 5 N
موفق
پیام شما ارسال شد.
آگهی کوچک
Tauberbischofsheim
۴٬۰۸۷ km
HAPFOAP-9000-M
موفق
پیام شما ارسال شد.
آگهی کوچک
Leipzig
۳٬۹۴۵ km
WINTERAD-410 DELUXE
موفق
پیام شما ارسال شد.
آگهی کوچک
Leipzig
۳٬۹۴۵ km
WINTERCKD 2500-400
موفق
پیام شما ارسال شد.
آگهی کوچک
Wiesbaden
۴٬۱۹۹ km
RAVENSBURGK 120
موفق
پیام شما ارسال شد.
آگهی کوچک
Gorzów Wielkopolski
۳٬۸۰۷ km
Viber-System560×1500 mm
موفق
پیام شما ارسال شد.
آگهی کوچک
Karsin
۳٬۶۹۵ km
LocatelliTORGOS CC 120
موفق
پیام شما ارسال شد.
آگهی کوچک
Leipzig
۳٬۹۴۵ km
WINTERCKD 1500-400 ATC
موفق
پیام شما ارسال شد.
آگهی کوچک
Leipzig
۳٬۹۴۵ km
HOLZMANNDBK-1300
موفق
پیام شما ارسال شد.
آگهی کوچک
Egenhofen
۳٬۹۵۱ km
HolzkraftMinimax fs52es SPIRAL digital
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






































































































