Four sided planer Weinig Unimat Super 4

Weinig Unimat Super4

Technical data:

- Manufacturer: Weinig
- Type: Unimat Super 4
- Year of manufacture: 2003
- Working width: 25 - 150 mm
- Working height: 15 - 50 mm- Shaft arrangement:

Spindle 1 below:
Planing and milling the guide groove
125x40x40 mm, Z=2
125x120x40 mm, Z=2
Spindle 2 above:
Combination tool consisting of special
planing head with guide groove and 2 flat
milling cutters. Precise thickness planing and flat milling
of the gluing surfaces on the right and left.
Face milling cutter on the right: 240x17x40mm, Z=8
Special planing head: 125x240x40mm, Z=4
Face milling cutter on the left: 240x80x122mm, Z=8
Tool flight circles 125 and 250mm
Spindle 3 below:
Removing the guide groove
and finish planing.
125x170x40mm, Z=4
- Spindle 1: 11 KW
- Spindle 2: 18.5 KW
- Spindle 3: 5.5 KW
- Feed engine: 2.2 KW
- Feedspeed: 5-20 m/min.

- Speed spindle 1 and 3: 6.000 rpm.
- Speed spindle 2: 7.000 rpm.

- Transport rollers D (hardened): 140 mm
- Length of infeed table: 2.000 mm
- Hardened machine tables
- Guide groove in machine table
Pedpfxeyatffe Abnsrc
- Suction nozzles 2x140 mm, 1x160 mm
- Volume flow: approx. 5,500 m³/h
- Volts/Hz: 400/50
- Location: Blomberg warehouse from 01/2026