Wide belt sander deburring machine

Viet SV3 - 4.3 RVXR

We offer:

Deburring machine
Manufacturer: Viet
Type: SV3-4.3 RVXR
Year of manufacture: 2020

Technical specifications and features:
- Sanding belt change on the left side of the machine.
- Tool set
- Digital thickness display
- Material too thick at the inlet
- Electro-pneumatic oscillation control
- Air filter with condensate separator and automatic drain
- Maintenance-free pneumatics
- Pneumatic lifting and lowering when switching the units on and off
- Machine with head adjustment (fixed working height 900 mm)
- Lifting system on 4 columns (spindle) with chain drive
- Table extensions at the front and rear, each with 1 roller
- Industry 4.0 (LAN) package with LAN connection to the network
- Working width: 1350 mm
- Machine with movable head
- Centesimal lifting system with inverter
- Useful working height 160 mm
- LED lighting inside the machine
- Electronic belt control for the longitudinal units
- Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm
- Electromechanical grit set
- The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted.
- V-Spin unit with 15 disc sanding system / diameter 80 mm
The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides.
- 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive
- 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive
- X-Spin unit / sanding system with 15 discs / diameter 123 mm
The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head.
- Oscillating Scotch-Brite brush
- Linear cleaning systems
- Conveyor belt
Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min
Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface
- Belt cleaning fan for the conveyor belt including suction
- IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units.

The control manages the following processes:
- Start sequence of the selected drive motors
- Storage of 1,000 processing programs
- Automatic positioning of the working thickness regulator
- Acoustic and visual indicator when the machine starts up
- Operating hour meter
- Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics.

The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included.
Iedjv Hxrgopfx Aazeal

Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information.
Subject to changes and errors in technical data and information, as well as prior sale.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.