Vötsch VC³ 7018 climate test chamber / temperature chamber -70°C to +180°C, humidity, 190 liters

Vötsch VC³ 7018

Vötsch

Climate testing chamber / Temperature testing chamber
Vötsch VC³ 7018 Climate testing chamber
Temperature and climate testing chamber, air-cooled

For sale is a used climate testing chamber from Vötsch Industrietechnik GmbH.

The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests.

Technical data

Manufacturer: Vötsch Industrietechnik GmbH
Type: VC³ 7018
Device type: Climate testing chamber / Temperature testing chamber
Test chamber volume: approx. 190 liters

Dimensions (approx.): Width: 870 mm, Depth: 1,550 mm, Height: 1,800 mm
Test chamber dimensions: Width: 580 mm, Depth: 450 mm, Height: 750 mm
Weight: approx. 460 kg

Temperature range: -70 °C to +180 °C
Temperature change rate (heating): approx. 4 K/min
Temperature change rate (cooling): approx. 3 K/min
Max. heat compensation: approx. 1,500 W

Temperature deviation (time-related): ± 0.1 to ± 0.3 K

Climate range (temperature): +10 °C to +95 °C
Humidity range: 10 to 98 % RH

Refrigerant 1: R404A
Refrigerant quantity: 2.5 kg
ND max.: 22.5 bar g
HD max.: 25 bar g

Refrigerant 2: R23
Refrigerant quantity: 0.75 kg
ND max.: 22.5 bar g
HD max.: 25 bar g

Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz
Rated power: 4.9 kW
Rated current: 16 A

Equipment

Touch panel control
Programmable controller
Stainless steel interior
Temperature and humidity control
LAN/Ethernet interface
Viewing window with internal lighting
Documentation / Operating manual
Test reports
Ijdpjzm Ni Esfx Amtebc
Accessories as shown in the pictures

Application areas

Temperature testing
Climate testing
Environmental simulation
Material testing
Electronics testing
Quality assurance
Research and development

Condition

Used
Workshop-checked
Moisture absorber replaced
Optical condition as shown in the pictures

Scope of delivery

1x Vötsch VC³ 7018 climate testing chamber
Documentation / Operating manual
Test reports
Accessories as shown in the pictures

Important note:
For the safety of our customers, the following work will be carried out on the offered climate chambers in advance:
1. Functional check and replacement of necessary components
2. Refilling with legally compliant refrigerant if necessary
3. Leak test with certificate
4. Documented test run after successful inspection

The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale.

Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.

We will be happy to answer any further questions by telephone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.