Cylindrical grinder

SZLIFIERKA do wałków TOS HISTIVAR BUB BUB 40 x 1500

We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO.

Technical data:

• Maximum workpiece diameter: 400mm
• Maximum workpiece length: 1500mm
• Centre height: 200mm
• Distance between centres: 1500mm
• Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm
• Tailstock quill stroke: 40mm
• Maximum tailstock clamping force: 4000N
• Spindle headstock centre taper: ISO 296-1991/Morse 5
• Tailstock centre taper: ISO 296-1991/Morse 5
• Maximum workpiece weight between centres: 500kg
• Maximum workpiece weight in chuck (including chuck): 100kg
Codpfowzkywjx Ag Ijhf
• Machine width (with enclosure): 6650mm
• Machine depth (with enclosure, without control panel): 2400mm
• Machine height (with enclosure): 1850mm
• Machine weight: 7000kg
• Total power requirement: 38kVA

Grinding spindle:

• Standard grinding wheel dimensions: 500 x 80 x 203.2mm
• Grinding spindle drive motor power: 11kW
• Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm
• Grinding headstock traverse servo motor power: 2kW
• Grinding headstock traverse servo motor torque: 9.5Nm
• Maximum continuous X-axis traverse speed: 2m/min
• Minimum X-axis grinding wheel increment: 0.001mm
• Maximum continuous X-axis traverse speed: 6m/min
• Minimum X-axis grinding wheel increment: 0.001mm
• Maximum grinding wheel increment in INC mode: 0.1 mm
• Table traverse servo motor power: 3.5 kW
• Table traverse servo motor torque: 16.7 Nm

Workpiece spindle:

• Workpiece spindle speed range: 1 – 150 rpm
• Workpiece spindle servo motor power: 3.5kW
• Workpiece spindle servo motor torque: 16.7Nm

More information available upon request via email or phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.