3D printer with cleaning gloveboxStratasys
Objet 260 Connex 2
3D printer with cleaning glovebox
Stratasys
Objet 260 Connex 2
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۹٬۵۰۰
وضعیت
کارکرده
موقعیت
Borken 

اطلاعات دستگاه
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۹٬۵۰۰
- موقعیت:
- Einsteinstraße 8a, 46325 Borken, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A22240692
- شماره مرجع:
- 24563
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۰.۰۴.۱۴۰۵
توضیحات
Stratasys Objet
Model: Objet260 Connex 2
Stratasys Objet260 Connex 2 3D printer + cleaning glovebox
Computer, monitor, software: Objet Studio Ver. 9.2.11.6825
The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology
and enable the combination of two or three base resins in a single printing process,
thus allowing the creation of prototypes from three materials,
as well as simulating overmolding or equipping build plates with selected models.
Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to
27 material properties simultaneously in a single part.
The device enables high-resolution 16-micron layers for printing complex geometries,
smooth surfaces, and thin walls.
Model materials:
Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue)
Rubber (Tango family)
Transparent (RGD720 and VeroClear)
Simulated polypropylene (Endur and Durus)
Biocompatible (MED610)
Heat-resistant (RGD525)
Digital Materials:
Digital ABS and Digital ABS2
Wide range of light transmission values
Rubber mixtures with a range of Shore A hardnesses
Simulated polypropylene materials with improved heat resistance
Applications:
Visual prototypes
Functional prototypes
Tooling and fixtures
Architectural models
Medical models
Injection molding molds
Concept models
Technical specifications:
Build volume:
255 × 252 × 200 mm
Layer thickness:
Horizontal layers of only 16 µm
Rjdpfxszh Dqye Af Ssw
Resolution:
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
Accuracy:
20 to 85 µm for parts smaller than 50 mm;
up to 200 µm for the full model size
(only for rigid materials, depending on geometry, design parameters, and model orientation)
Size and weight:
870 × 735 × 1200 mm; 410 kg
AC power connection
100–120 VAC, 50–60 Hz, 13.5 A, single-phase
Or
200–240 VAC, 50–60 Hz, 7 A, single-phase
Condition: used
Scope of delivery: (See image)
(Changes and errors in technical data are subject to change!)
We will gladly answer any further questions you may have over the phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Model: Objet260 Connex 2
Stratasys Objet260 Connex 2 3D printer + cleaning glovebox
Computer, monitor, software: Objet Studio Ver. 9.2.11.6825
The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology
and enable the combination of two or three base resins in a single printing process,
thus allowing the creation of prototypes from three materials,
as well as simulating overmolding or equipping build plates with selected models.
Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to
27 material properties simultaneously in a single part.
The device enables high-resolution 16-micron layers for printing complex geometries,
smooth surfaces, and thin walls.
Model materials:
Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue)
Rubber (Tango family)
Transparent (RGD720 and VeroClear)
Simulated polypropylene (Endur and Durus)
Biocompatible (MED610)
Heat-resistant (RGD525)
Digital Materials:
Digital ABS and Digital ABS2
Wide range of light transmission values
Rubber mixtures with a range of Shore A hardnesses
Simulated polypropylene materials with improved heat resistance
Applications:
Visual prototypes
Functional prototypes
Tooling and fixtures
Architectural models
Medical models
Injection molding molds
Concept models
Technical specifications:
Build volume:
255 × 252 × 200 mm
Layer thickness:
Horizontal layers of only 16 µm
Rjdpfxszh Dqye Af Ssw
Resolution:
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
Accuracy:
20 to 85 µm for parts smaller than 50 mm;
up to 200 µm for the full model size
(only for rigid materials, depending on geometry, design parameters, and model orientation)
Size and weight:
870 × 735 × 1200 mm; 410 kg
AC power connection
100–120 VAC, 50–60 Hz, 13.5 A, single-phase
Or
200–240 VAC, 50–60 Hz, 7 A, single-phase
Condition: used
Scope of delivery: (See image)
(Changes and errors in technical data are subject to change!)
We will gladly answer any further questions you may have over the phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 2861 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است





























