STEUER PZ90 Hot Foil Machine

STEUER PZ90

Sheet size minimum: 290x400 mm
Sheet size maximum: 640x900 mm
Sheet thickness maximum: 0.75 mm
Hot stamping size maximum: 620x840 mm
Sheet edge free of print stamping (gripper edge): 8-10 mm
Number of heating zones: 4
Cylinder diameter: 540 mm
Backing thickness: 1.5 mm
Height of the feed pile and pre-pile: 340 mm
Height of the delivery pile: 510 mm
Vertically adjustable hot stamping bed: -2...+0.4 mm
Width of the stamping foil rolls (max): 840 mm
Distance between the stamping foil rolls (min): 3.0 or 1.0
Outside diameter of the stamping foil rolls (max): 140 mm
Foil pull rollers and programs (max): 4
Short pulls per program and cycle, number 1...99, length: 0...999 mm
Intermediate pull per program and cycle, number as required: 0...999 mm
Long pull per program and cycle, number 1, length: 0...999 mm
Hot stamping die height: 7 mm
Different hot stamping die height also available if required: 6.35 mm
Machine speed: 600-4000
Hot stamping speed, max: 600-3000
Connected electrical load ratings (3-phase) for drive: 10.8 kW
Connected electrical load ratings for heating and foil pull: 17.0 kW
Voltage: 3x400V, 50Hz

Overall dimensions:
Length of the machine: 4000 mm
Width of the machine: 2540 mm
Height of the machine: 1950 mm
Support area of the base frame: 2.1 m²
Bsdpezatf Ejfx Apnelp
Work area: 5650 mm
Length: 5650 mm
Width: 3650 mm
Total weight: 7500 kg.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.