Mobile deduster

Spänex SMU 45

Exhibition machine

Type A according to DIN EN 16770:2018

without fire extinguishing device, tested according to the test principles

GS-HO-07 of the BGHM.

The dust extractor is a mobile suction and filter device for commercial use for installation in the work area.

The dust extractor is suitable for collecting, conveying and separating dry wood, paper or
plastic chips and dust on various processing machines.

Consists of a vacuum-resistant housing with suction nozzle

and check valve, antistatic filter elements with

Dkedpfx Aovwfu Noh Seh
jet pulse cleaning, high-performance radial fan on the clean gas side with three-phase motor of energy efficiency class IE3

as well as integrated exhaust air sound insulation and air outlet grille.

With 2 swivel and 2 fixed castors, 2 chip containers with filling bags and
a circuit with 5 m connection cable and CEE device plug.

The circuit is designed for automatic operation. The automatic start-up control for a maximum of 6 machines and the automatic cleaning of the filter with running time addition are included. For the automatic start-up, either the take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer paint in RAL 9006 (white aluminum). Delivered assembled and ready for use. For cleaning, compressed air prepared on site must be provided to the device (connection via plug nipple NW 7 / 6 bar). Technical data:
Suction nozzle: Ø 250 mm
Residual dust content:

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.