Cylindrical grinding machine- Surface- Internal- ExternalSIELEMANN
R FuBR 80 NC
Cylindrical grinding machine- Surface- Internal- External
SIELEMANN
R FuBR 80 NC
سال ساخت
۱۹۸۳
وضعیت
کارکرده
موقعیت
Schloß Holte-Stukenbrock 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- تولید کننده:
- SIELEMANN
- مدل:
- R FuBR 80 NC
- شماره دستگاه:
- 8151
- سال ساخت:
- ۱۹۸۳
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Görlitzer Straße 9, 33758 Schloß Holte-Stukenbrock, DE

تماس بگیرید
جزئیات فنی
- قطر میز چرخان:
- ۸۰۰ میلیمتر
- ارتفاع سنگزنی:
- ۷۵۰ میلیمتر
- حداکثر وزن قطعه کار:
- ۸۰۰ کیلوگرم
- ارتفاع کل:
- ۴٬۱۰۰ میلیمتر
- عرض کل:
- ۲۶٬۶۵۰ میلیمتر
- طول کل:
- ۴۴٬۰۰۰ میلیمتر
- طول تغذیه محور Y:
- ۷۵۰ میلیمتر
- طول پیشروی محور Z:
- ۵۵۰ میلیمتر
- وزن کل:
- ۱۳٬۰۰۰ کیلوگرم
- قطر سنگ سنباده:
- ۴۰۰ میلیمتر
- قطر دیسک:
- ۴۰۰ میلیمتر
- سرعت اسپیندل سنگ زنی:
- ۱٬۴۶۰ دور/دقیقه
- قطر سنگزنی:
- ۸۰۰ میلیمتر
- عرض کابین کنترل:
- ۶۵۰ میلیمتر
- نوع جریان ورودی:
- جریان مستقیم
- ارتفاع کابین کنترل:
- ۱٬۹۰۰ میلیمتر
- طول تابلو کنترل:
- ۱٬۸۰۰ میلیمتر
- حداکثر سرعت اسپیندل:
- ۱٬۸۰۰ دور/دقیقه
- سرعت اسپیندل (دقیقه):
- ۱٬۴۶۰ دور/دقیقه
- ظرفیت بار میز:
- ۹۰۰ کیلوگرم
- حداکثر قطر قطعه کار:
- ۸۵۰ میلیمتر
- عرض سنگ سنباده:
- ۶۰ میلیمتر
- عرض میز:
- ۱٬۲۴۰ میلیمتر
- قدرت:
- ۳۵ کیلووات (۴۷٫۵۹ اسب بخار)
- حرکت سریع محور X:
- ۲ متر/دقیقه
- حرکت سریع محور Y:
- ۱۰۰ متر/دقیقه
- حرکت سریع محور Z:
- ۲ متر/دقیقه
- نیاز به ارتفاع:
- ۴٬۱۰۰ میلیمتر
- نیاز به فضا طول:
- ۵٬۱۰۰ میلیمتر
- عرض مورد نیاز:
- ۲٬۶۵۵ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A15056110
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۷.۱۲.۱۴۰۲
توضیحات
Good day,
For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding.
The machine has a swivel stand with 3 different sanding heads for the respective area of application.
Complete machine documentation is available and can be presented upon inspection.
The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced:
- 3x New weight compensation cylinders
- 1x new hydraulic unit (complete)
- New guideway covers
- Revised rotary table group
Lhjdpfxerntirs Agnen
Technical data
Machine length: 4.400mm
Machine width: 2,655mm
Machine height: 4.100mm
Machine weight: 13.000Kg
Control cabinet width: 650mm
Control cabinet height: 1.900mm
Control cabinet length: 1.800mm
Grinding table diameter: 800mm
Grinding table load capacity: 800kg
Grinding table drive power: 0.21 - 14.5KW
Grinding table speed: 100 1/min (both directions)
Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots
Z-axis travel (grinding table): 550mm
Maximum grinding height (Y): 750mm
Lubrication pump Masch. Bed: 0,18KW
Lubrication pump Masch. Column: 0,1KW
Leak oil pump: 0,065KW
Hydraulic pump: 1.5KW
1) External round grinding head
Spindle drive power: 11KW
Spindle speed: 1,450 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
2) Internal round grinding head
Spindle drive power: 5.5KW
Grinding wheel: Variable
Feed speed (Y): 100 mm/min
3) Flat-round sanding head
Spindle drive power: 11KW
Spindle speed: 1,800 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
Viewing appointments possible at short notice by arrangement !!!
With kind regards
R.Suckow / Managing Director
UNITTOOL Werkzeugmaschinen GmbH
33758 Schloß Holte Stukenbrock
Görlitzerstraße 9
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding.
The machine has a swivel stand with 3 different sanding heads for the respective area of application.
Complete machine documentation is available and can be presented upon inspection.
The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced:
- 3x New weight compensation cylinders
- 1x new hydraulic unit (complete)
- New guideway covers
- Revised rotary table group
Lhjdpfxerntirs Agnen
Technical data
Machine length: 4.400mm
Machine width: 2,655mm
Machine height: 4.100mm
Machine weight: 13.000Kg
Control cabinet width: 650mm
Control cabinet height: 1.900mm
Control cabinet length: 1.800mm
Grinding table diameter: 800mm
Grinding table load capacity: 800kg
Grinding table drive power: 0.21 - 14.5KW
Grinding table speed: 100 1/min (both directions)
Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots
Z-axis travel (grinding table): 550mm
Maximum grinding height (Y): 750mm
Lubrication pump Masch. Bed: 0,18KW
Lubrication pump Masch. Column: 0,1KW
Leak oil pump: 0,065KW
Hydraulic pump: 1.5KW
1) External round grinding head
Spindle drive power: 11KW
Spindle speed: 1,450 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
2) Internal round grinding head
Spindle drive power: 5.5KW
Grinding wheel: Variable
Feed speed (Y): 100 mm/min
3) Flat-round sanding head
Spindle drive power: 11KW
Spindle speed: 1,800 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
Viewing appointments possible at short notice by arrangement !!!
With kind regards
R.Suckow / Managing Director
UNITTOOL Werkzeugmaschinen GmbH
33758 Schloß Holte Stukenbrock
Görlitzerstraße 9
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2012
ارسال درخواست
تلفن & فکس
+49 5207 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


























