Tube bending machinesSchwarze-Robitec
CNC 60 TB MR VA

اطلاعات دستگاه
- نام دستگاه:
- Tube bending machines
- تولید کننده:
- Schwarze-Robitec
- مدل:
- CNC 60 TB MR VA
- شماره دستگاه:
- 2011-0250
- سال ساخت:
- ۲۰۱۱
- وضعیت:
- خوب (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۳۴٬۷۹۷ h
جزئیات فنی
- قطر لوله (حداکثر):
- ۶۰۰ میلیمتر
- طول لوله (حداکثر):
- ۱٬۵۰۰ میلیمتر
- زاویه خم (حداکثر):
- ۱۸۰ °
- شعاع خم شدن (حداکثر):
- ۲۰۰ میلیمتر
- ضخامت دیواره:
- ۳ میلیمتر
ارائه
- موقعیت:
- آلمان
– فاصله: حدود ۴٬۰۶۹ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
€۲٬۰۰۰٫۰۰ (الزامی)
رایگان
توضیحات
The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical systems completely renewed.
TECHNICAL DETAILS
Pipe diameter: 16 - 60 mm
Wall thickness: max. 3.0 mm
Bending radius: 20 - 200 mm
Pipe lifting length: 1,500 mm
Bending angle: max. 180° + springback
Pipe length: 400 - 1,500 mm
Pipe outer diameter: 28 mm - 60 mm
Material parameters
Tensile strength of stainless steel: max. 750 N/mm²
Tensile strength of mild steel: max. 450 N/mm²
Performance limit (steel): Ø 60 x 3 mm
Performance limit (stainless steel): Ø 57 x 2 mm
Travel movements
Bending direction: left
Bending speed forward: max. 22.0 rpm (infinitely adjustable)
Bending speed return: constant 22.0 1/min
Rotation angle: max. 360°
Twisting speed: 50 rpm
Height adjustment multiple radii: lowest tube center 55 mm
Height travel: suitable for 3-groove bending tools
MACHINE DETAILS
Follow-up time: 125 ms
Machine weight: approx. 8.0 t
Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm
Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm
Control panel (L × W × H): 900 × 600 × 1,850 mm
Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm
Operating hours: approx. 34,797 h
Performance data
Total power requirement: 55 kW
Hydraulic filling volume: 340 l
steering
Bending levels: up to 6 (CNC programmable)
Positioning device: NTB version
Control unit: Schwarze-Robitec operating and control panel
EQUIPMENT
- Automatic pipe cold bending machine
- Pipe positioning device
- Gripper
- Pipe magazine Schwarze-Robitec
- Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction
- various bending tools for Ø 60 mm pipe
- various aids
- Cooling unit control cabinet
- Foot control (2-way)
- Schwarze-Robitec control panel
- Cooling unit control cabinet Rittal type SK 3361100
Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A19182071
- شماره مرجع:
- AUC-2505055
- بهروزرسانی:
- آخرین بهروزرسانی در ۳۱.۰۲.۱۴۰۴
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.