Lathe

Schaublin 102 N-VM

Workspace
Tip height 102 mm
Centre width
- with normal headstock 450 mm
- with reduction gear headstock 375 mm
- over the cheek 200 mm
- over the slide 120 mm
Headstocks
spindle nose for collets type Schaublin W25
spindle bore 25 mm
Collet bore 20 mm
Reduction ratio of the gearbox 1:5
Cheek
Height x width x length 168 x 130 x 1000 mm
cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened
and ground.
Slide
Largest travel on the cheek 400 mm
Tool slide width - length 80 - 194 mm
Path manual adjustment 90 mm
Center height above tool slide 20 mm
Shaft of the lathe tools 12 x 12 mm
cross slide width - length 94 - 300 mm
Path manual adjustment 100 mm
Bed slide length of the guide on the cheek 250 mm
Lead screw
Guiding spindle for longitudinal turning and threading, Ø 40 mm
Lead screw hardened, thread ground, pitch 4 mm
Speed range
Speed 270 - 3000 rpm
Longitudinal turning 0.02 - 0.3 mm/rev.
Thread cutting
Largest pitch with standard change gear set 4 mm
Machine plate for 20 metric pitches 0.25 - 4 mm
Machine plate for 25 english pitches 80 - 6 G/"
Fodpfsbxkl Tex Ag Isgk
Tailstock
Diameter of the quill 30 mm
Inner taper of the quill 2 MORSE
Distance of the quill 80 mm
Cooling device
Coolant tank - capacity 23 litres
Net weights
Lathe on workbench, approx. 225 kg
Lathe on box base, approx. 550 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.