Single column - eccentric press

RICHTER PEKRS 80

Single-column eccentric press RICHTER type PEKRS 80
Year of construction 1970 - overhaul 2024
Compressive force 80 ton.
throat depth 350 mm
Table size 900 x 650 mm
Hole in the clamping table Ø 200 mm
ram surface 700 x 500 mm
Stroke rate 70 strokes/min.
Stroke adjustment 6 - 100 mm
ram adjustment 85 mm
Installation height max. 400
Clamping pin bore Ø 50 mm
Table height above floor 810 mm
Motor power 8 kW
Mains connection 400 Volt, 50 Hz
- ORTLINGHAUS pneumatic clutch/brake combination
- HERION XSz 32 press safety valve
- Pneumatic ram compensation cylinder
- Overload protection with breaker plate in ram
- Central grease lubrication with hand pump
Space requirement L x W x H 1800 x 1250 x 2830 mm
Weight 5.7 tons
Very good condition

Technically overhauled and converted to the latest UVV with new electrics
Control conversion in 05/2024 - suitable for manual insertion work -
Hodpfx Aji Db Ibjbveh
in accordance with DGUV Information 209-030 Press inspection
and Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements
EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses
- Control system with plain text error messages and diagnostic screen for rapid fault localization
- New electrical cabinet, mounted on the side of the machine
- completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display
- Two-hand control panel with emergency stop and engagement lock
- el. foot switch
- Cam switch unit with run monitor control
- Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator
- New wiring of the machine
- Updated operating instructions

The machine is equipped with 6 operating modes:
1 = Set-up
2 = Single stroke two-handed
3 = Single stroke foot
4 = continuous run foot
5 = automatic continuous run
6 = reverse run

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.