3D CNC CMM (tactile)

Profitech Technologies Innometrik Advanced 564

3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price)
Open Cable

Special features of the gantry design:
Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio.

The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine.

Hodpfxedyah So Ahvsfk
24 air bearings for smooth movement of the three axes.

High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs.

Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results,
Air filter and regulator.

Z-axis pneumatic counterweight system.

Granit table with thread inserts of size M10.

Passive vibration isolation pads

Technical specifications
Measurement paths: X: 500mm
Y: 600mm
Z: 400mm

Max workpiece weight: 250kg
Weight of the machine: 850kg
Dimensions over everything: 1290x1160x2350mm

Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4:
Volumetric probing deviation: MPEP = 2.2μm
Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm)

Environmental conditions:
Room temperature standard: 18-22 ° C
Operating temperature 10-35 ° C

Air Supply:
Minimum air pressure: 6bar
Air consumption: 90NI / min

Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)