Primultini 1400 cutting line

Primultini 1400

SECOND-HAND LOG CUTTING LINE, OVERHAUL YEAR 2025

A. LOG FEEDING RAMP
Length: 6 m, 3 chains
Gear motor

1 LOADING GROUP FROM RAMP TO CARRIAGE
- with 4 arms with hydraulic control, 1 cylinder

CUTTING COLUMN MODEL 1400
Structure made of cast iron with stabilization treatment.
- Flywheel diameter: 1,400 mm
- Flywheel width: 180 mm for maximum blade width of 205 mm
- Flywheels with solid discs and special ribs to increase mechanical characteristics, subjected to stabilization treatment
- Upper flywheel support on prismatic guides with ball recirculation
- Hydraulic blade guide based on prisms and ball recirculation, equipped with hydraulic double-cylinder blade pressure unit: the blade is pushed outward during the cutting phase for high stability at high speed.
During the return phase of the log carriage or when the carriage is not in operation, the blade automatically retracts from the guides, thus reducing the pressure.
- Centralized column lubrication, with manual pump
Dodpfx Afsw Exh Rjnocn
- 90 kW main motor, automatic star-delta start, pulley, belts, and motor brake

HYDRAULIC CARRIAGE Mod. CF
- 4 hydraulic clamps
- Maximum clamp jaw opening: 1000 mm
- Hydraulic locking of the clamps with 2 pressure settings
- Simultaneous hydraulic buffers
- Rapid and precise movement of the hydraulic clamps via brushless servo motor
- Electronic thickness control model: for clamp adjustment, composed of an integrated operator panel connected to a PLC.
- The PLC communicates directly with the brushless motor, enabling fast and precise positioning up to one-tenth of a millimeter.
- The different machine components (column, carriage, control panel) are interconnected via Can Open protocol. This system eliminates all control cables and auxiliary relays, minimizing wiring and reducing failure risk and electromagnetic interference.
- Storage of absolute and relative thicknesses
- 4 independent electro-hydraulic arms, allowing easy log rotation up to 90°
- Log feed speed max. 140 m/min
- Automatic centralized lubrication with electric pump
- Dual control desk with seat and electric servo controls
- Electric cables and panel
- Rails

FIRST UNLOADING ROLLER CONVEYOR – slab removal
- Length: 6 m
- Gear motor
- Fixed end stop barrier

Hydraulic power unit equipped with:
- Pump
- Tank, filters, oil level sight glass
B+C. a) Electrical installation: cables, photocells, sensors, switches, etc.
b) Hydraulic installation: steel pipes of various sizes, elbows, brackets, rubber hoses, solenoid valves, etc.
Electrical control panel with IP 55 protected buttons, main switch, transformer, circuit breaker, contactors, thermal and auxiliary relays, PLC, etc.

MANUFACTURER: PRIMULTINI ITALY

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.