Pipe grinder

NS Maquinas ML75 ab € 9.900,--

The tube finishing machine ML75 is ideal to polish round, oval and elliptic tubes with diameters up to 76mm with tight bend radius.

ML75 has a slim and compact planetary wheel which permits the operation of curved tubes. This machine can be equipped with an automatic feeding system for straight tubes finishing.

This new tube finishing machine is the answer for curved tubes which are too tight to fit ML100 and with diameter too big to fit ML50.

Polishing bent tubes with tight radii:

The planetary wheel of ML75 has a compact design for tight curved tubes finishing with the highest flexibility.

Straight tubes finishing:

Although ML75 was designed mainly for curved tubes finishing, it can be fitted with automatic feeding systems in order to polish straight tubes whenever needed.

Quick set-up:

Simple to work with ML75 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing.

Low heat:

The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems.

Technical Details - ML75:

Working capacity (Ø mm) 10-76.2
No. Stations 1
Abrasive belt dimensions (mm) (2x) 25x860
Abrasive belt speed (m/s) 3-22
Feeding speed (m/m) 1-5
Abrasive belts motor (kW) 2.2
Wheel motor (kW) 1.5
Feeding motor (kW) (2x) 0.12
Total power (kW) 3.94
Consumption (A) 10
Dust extraction connection (Ømm) 80
Ljdped Hfg Esfx Afpeak
Dimensions (mm) 750x1000x1300
Weight (kg) 230