Metal Gringing & Edge Rounding Machine

NS Maquinas DM 1100 Z2C - NEUMASCHINE

DESCRIPTION

DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or stamping separation of metal parts, with dimensions ranging from 50 x 50 mm up to 1100 x 100 mm.

The 1st station processes the products using a contact roller (approx. 55° Shore) with a sanding belt, removing heavy burrs in the first step.

Ibjdsd Ixadjpfx Aftsb
The 2nd station processes the products with two counter-rotating transverse belts from below and above. The transverse belts round the edges of the parts to be processed, both on the inner and outer edges.

A major advantage is also the deburring of products with surface protection film, as only the edges are processed without damaging the film.

Technical data – DM1100 Z2C:

Working capacity (diameter mm) 1100x100
Number of belt stations (Z) 1
Number of transverse belt stations 2
Sanding belt, dimensions (mm) 1100x2200
Sanding belt speed (m/s) 8-22
Transverse belt speed (m/s) 2-8
Feed speed (m/s) 0.6-3.2
Sanding belt motor per head (kW) 18.5
Transverse belt motor (kW) (2x) 3
Feed motor (kW) (3x) 0.18
Total power (kW) 33
Power consumption (A) 62
Dust extraction connection per head (diameter mm) 150+185
Dimensions (mm) 3600x2330x2350
Weight (kg) 5000

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.