Briquetting pressNestro
NBP C 150
Briquetting press
Nestro
NBP C 150
سال ساخت
۲۰۱۹
وضعیت
کارکرده
موقعیت
آلمان 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- D - Hessen
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19798295
- شماره مرجع:
- ISS20250819-5453
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۹.۰۵.۱۴۰۴
توضیحات
Used machine
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Iodpfx Acew Rhk Djyetn
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Identical in construction to Weima C 150
Year of manufacture: 2019
1845 operating hours
Equipment and technical data:
Drive power: 5.5 kW
Briquette diameter: 50 mm
Hydraulic oil capacity: 160 l
Throughput capacity: up to 50 kg/h (depending on material)
Connection rating: 400 V +/- 5% / 50 Hz
Includes:
Iodpfx Acew Rhk Djyetn
Press mechanism with filling cylinder, main cylinder, clamping cylinder
Connection part for transport line
Chromed clamp
Hydraulic tank 160 l with pump motor + valve control
Safety switch for oil temperature
Control cabinet and electrical control system
Briquette length monitoring
Automatic end position for all cylinders
Manual control
Automatic "On/Off" with level limit switch
Material: shavings, sawdust from solid wood, loose, clean and free from contaminants*
Maximum dimensions: 10 mm
Throughput performance: approx. 50 m³/year/
* Contaminant specification: Everything except wood, wood pieces larger than 15 mm.
The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics!
Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer.
With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler.
In case of heat build-up, operating time may be drastically reduced due to increased temperature.
With new press clamp
Availability: by arrangement
Location: Flörsheim
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2008
ارسال درخواست
تلفن & فکس
+49 6146 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است