Filter housing with briquetting press

Nestro FNFHSU 9/9 inkl. C 150 Brikettierpresse

Used Equipment

Year of Manufacture: 2011

Condition: Currently installed

Equipment and Technical Data:

-Filter housing base ring NFHSU 9/9 with discharge chute for press
- Discharge: 1.1 kW
- Storage volume in the base ring approx.: 3.25 m³
- Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm
- Ground clearance: 350 mm
- Conveyor screw for briquetting press 0.75 kW
- Extension and expansion rings are optional; max. storage volume approx. 12 m³
- Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm
- Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap
- Filter for filter housing NFHSU 9/9/20, filter area 116 m²:
The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection.
Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation.
Further technical data:
- Filter tube length: 2,000 mm
- Filter tube diameter: 230 mm
- Number of filter tubes: 81
- Filter area: 116.0 m²
- Filter regeneration: automatic/motorized
- Number of vibrating motors: 4 pcs
- Fan shroud for NFHSU 9/9 including inspection door
- Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa:
A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper.
Technical data at a glance:
- Volumetric flow: 16,400 m³/h
- Corresponding underpressure: 3,200 Pa
- Electric motor: 22 kW / 400 Volt / 50 Hz
- Speed: 3,000 rpm
- Design: B5
- Pressure nozzle: without
- Application area: Nestro underpressure filter and others

- Injection nozzle d= 400 mm with flange ring
- Injection nozzle d= 350 mm with flange ring
- Backflow damper d= 350 mm with flange edge
- Backflow damper d= 400 mm with flange edge

Hedpfszvz Tbex Afhefn
- Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5:
Technical data:
- Power consumption (hydraulics): 5.5 kW
- Briquette diameter: 50 mm
- Weight: 650 kg
- Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h
- Ground clearance with base frame (art. no. 710300): 350 mm
- Briquetting press, dust-proof
- Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable
The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.