Swivel mill

Martin T 26

Used machine

Year of manufacture: 2002

Condition: Well-maintained (from a public facility)

Design:

Table size: 1255 x 900 mm
Table height: 900 mm
Table opening: 305/225/160/105/72 mm
Weight: 1150 kg
Spindle speeds: 3000/4500/6000/9000 RPM with belt-driven quick-change system
Indicators: electronic spindle speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for milling depth; double operating hour counter for total and batch run times
Milling spindle: electrically swiveling +/- 45, 50° via button; electrically adjustable height with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch
Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW
Milling fence: aluminum milling fence, hard-coat coated with holder for groove plate or guide rails
Handwheel adjustment according to mechanical digital counters; separate adjustable run-in basin; workpiece diameter max. 250 mm
Extraction: twice 120 mm diameter
Maintenance device: central lubrication via pump, lubrication of the milling spindle via grease quantity regulator
Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for run-in ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the run-in ring with extraction nozzle and feed strip

Electrical design: lockable main switch, automatic star-delta starter, electrically wear-free brake, connection for extraction control, undervoltage protection; CEE three-phase connection for feed unit (= 5-pole socket)
Emission values: noise levels according to prEN ISO 11202; workpiece diameter 125 mm, Z=2, n=6000 RPM
Workplace emission:
Idle noise (without extraction) 68.6 dB(A)
Operating noise (with extraction) 84.6 dB(A)
Work at the milling fence - feed side max. 0.34, removal side max. 0.28
With slot hood - feed side max. 0.21, removal side max. 0.20
Minimum air flow rate for both extraction nozzles: 24 m³/min at 1000 Pa

Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V protective device; equipment with Centrex type protective device; swiveling control panel with control buttons and digital display for milling spindle swivel and spindle up/down with relative and absolute position display and automatic display of the correction value for the milling depth during swiveling; necessary if a feed unit is installed to the right of the milling fence.
Milling fence with resettable mechanical digital counter for total adjustment
Tedpfx Ajzw Rvzoggeb
Integral fence 650 and 500 mm long with filler bar
Support for feed unit (can be swiveled away) with motorized height adjustment (for machines with control panel)
Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter)

Availability: short notice
Location: Flörsheim

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.