Table mill

Martin Schwenkfräse T26 Duo Control

Martin T26 DuoControl Spindle Milling Machine

5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V
*with milling arbor 40 mm / 160 mm length

//Table size:
2405 mm x 900 mm

//Table height:
900 mm

//Table openings:
electric 70 mm - 220 mm

//Weight: 1300 kg

//Speeds:
3000/4500/6000/9000 rpm
with belt quick-change system

//Displays:

electric speed display
Digital (LED) for spindle height (absolute and relative)
and swivel angle
automatic display of the correction value for the milling depth
Dual operating hour counter for total and batch run time

//Milling spindle:

electrically swiveling via push button +/- 45.50°
electrically adjustable in height with rapid and creep feed, with steep taper SK 40,
Dornfix quick-change system
incl. torque wrench
wear-free, electrically braked
Electro-pneumatic locking via selector switch

//Spindle stroke:

150 mm at 5/6 kW and 7.5 kW, 125 mm

//Milling fence:
Aigner integral fence
Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip
Handwheel adjustment with mechanical digital counter
Infeed jaw adjustable separately
Maximum WZ diameter 250 mm

//Extraction:

Extraction port 120 mm diameter
on the milling fence

Extraction port 120 mm diameter
under the table

//Maintenance equipment

Central lubrication via pump
Lubrication of the milling spindle via grease volume regulator
1 x open-end wrench
1 x torque wrench for Dornfix system
1 x oil pump
1 x grease pump filled with long-life grease
1 x ball bearing for guide ring 62 mm
1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip

//Electrical equipment:

Lockable main switch, automatic star-delta start, electric brake wear-free
Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket)
Operating push button for direction of rotation selection, motor circuit breaker and winding protection

BG test certificate No. 991002
GS wood dust tested No. 991001
EC type-tested No. 991003

Additionally:

1 x Electrically adjustable table opening
1 x Support for feed unit mount, swiveling
Rsdpfxszamwus Apnou
with motorized height adjustment with control panel
1 x extendable table extension

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.