Labeling machine

4050S

Bluhm Weber Legi-Air- 4050S Labeling Machine
4.14.1 Basic construction

The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.

The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.

4.14.2 Functional sequence

Fodpfoibh Tkjx Aa Hogk
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.

Bluhm Weber Legi-Air- 4050S