Band Saw - Vertical

MÖSSNER REKORD SSF 801

Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972

TECHNICAL DATA:
- Roller diameter: 800 mm
- Outreach: 785 mm
- Maximum clearance height: 720 mm
- Working table: can be swiveled on two sides
Swivel range: right: approx. 45°, left approx. 10°
- Band saw length: min. 5.650 mm, max. 5.800 mm
- Saw band width: 10/20 mm
- Cutting speed range, stepless:
15 - 940 m/min in 3 cutting speed ranges:
I: 15 - 79 m/min
II: 67 - 305 m/min
III: 207 - 940 m/min
IV Rapid speed: 4.000 m/min

- Drive: 11kW
Godpjvx Hugofx Aggjkc
- Power supply unit: 500 V, 50 Hz
- Machine weight: approx. 2,3 tons
- Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m

Additions / accessories:
- Hot-knife cutting:
For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm,
the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min.
- Band filing device
- Belt grinding device
- Circular cutting device:
The circular cutting device is attached to the guide arm directly above the clamping plate.
With its help, circular saw cuts from 40 - 290 mm radius can be made.
- Choice of saw bands
Minimum radii that can be cut: Radius: Band width:
6 mm 3 mm
10 mm 4 mm
17 mm 6 mm
30 mm 8 mm
45 mm 10 mm
140 mm 16 mm
The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut.
Steel: 5 - 20 mm material thickness 14 Z"
over 20 mm " 8 - 10 Z"
under 5 mm " 18 - 22 Z"
Gray cast iron: 5 - 20 mm " 10 - 14 Z"
over 20 mm " 6 - 8 Z"
Brass, copper, zinc: over 5 mm " 8 - 10 Z"
under 5 mm " 10 - 14 Z"
Aluminum and plastics: over 5 mm " 7 - 10 Z"
Soft solder: 8 - 14 Z"

- Saw guides
The machine has two different saw guides:
* 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width.
* 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting.

There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -