4 side moulder

KUPER SWT XL-5

Number of spindles 5 St.
Working width 230 mm
Working height 160 mm
Length of the planing table 2500 mm
Feed motor 4 kW
Feed speed 6-24 m/min.
Control K2 Basic 7"-Touch
KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER
-----
LIKE NEW, showroom machine !
- 5 spindles: bottom, right, left, top, bottom
- Speed: frequency-controlled 4,000 - 6,000 rpm
- Width and height motor-controlled:
left spindle radial
upper spindle axial
- Feed carriage motorized adjustment

TECHNICAL DATA in Detail
-----
Working width (for tool diameter 125-163 mm): 15-230 mm
Working height (for tool diameter 125 mm): 10-160 mm
(Tool diameter up to 163 mm): 10-160 mm

Min. workpiece length:
single piece: min. 800 mm
piece by piece: min. 300 mm
The processing of the work pieces is depending on the
following operating parameters:
material, wood moisture, tools, diameter of the chip removal
and feed speed.
If necessary adjustments to the operating parameter have to
be done.

SPINDLE CONFIGURATION
-----
bottom, right, left, top, bottom

1st spindle: HORIZONTAL, BOTTOM
-----
Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP)
Diameter 40 mm
Spindle length 250 mm
Usabale length for tools Spindle length minus
approx. 6 mm
Drive, frequency-controlled 4000 - 6000 rpm
Perimeter of tools 125 - 160 mm
Reference cutter Diameter difference
20 - 25mm to the cutterhead
Connecting piece D = 125 mm
Quick action lock nut Pro-Lock

2nd spindle: VERTICAL, RIGHT
-----
Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP)
Diameter 40 mm
Spindle length 165 mm
Usable length for tools spindle length minus
approx. 6 mm
Drive, frequency-controlled 4000 - 6000 rpm
Perimeter of tools 112 - 200 mm
Adjustment path axial 60 mm
Adjustable table plate to tool radius
Standard profile depth 20 mm
Connecting piece D = 125 mm
Aspiration individual adjustable
shavings guiding plate
Quick action lock nut Pro-Lock

3rd spindle: VERTICAL, LEFT
-----
Siemens IE3 motor with inverter brake 7,5 kW (10 HP)
Diameter 40 mm
Spindle length 165 mm
Usable length for tools spindle length minus
approx. 6 mm
Drive, frequency-controlled 4000 - 6000 rpm
Perimeter of tools 112 - 200 mm
Adjustment path axial 60 mm
Standard profile depth 20 mm
Adjustable table plate to tool radius
Connecting piece D = 125 mm
Aspiration individual adjustable
shavings guiding plate
Quick action lock nut Pro-Lock

4th spindle: HORIZONTAL, TOP
-----
Siemens IE3 motor with inverter brake 7,5 kW (10 HP)
Diameter 40 mm
Spindle length 235 mm
Usable length for tools spindle length minus
approx. 6 mm
Drive, frequency-controlled 4000 - 6000 rpm
Perimeter of tools 112 - 200 mm
Pressure shoe pneumatically, via linear guides
dynamically adjustable
Standard profile depth 20 mm
Connecting piece D = 125 mm
Aspiration individual adjustable
shavings guiding plate
Quick action lock nut Pro-Lock

Hjdjwgwmhepfx Anfsu
5th spindle: HORIZONTAL, BOTTOM
-----
Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP)
Diameter 40 mm
Spindle length 235 mm
Usable length for tools spindle lenght minus
approx. 6 mm
Drive, frequency-controlled 4000 - 6000 rpm
Perimeter of tools 112 - 200 mm
Adjustment range axial 20 mm
Connecting piece D = 125 mm
Aspiration individ...