Kundig Premium-2 1350-RG

Kundig Premium-2 1350-RG

This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine.

Additional equipment

• Steel roller
• Rubber roller with a device for a needle roller (unused)
• Belt release

Machine Benefits

Technical Machine Benefits

• Two roller conveyors, each 3 meters long
• Sanding belts (remaining quantity unspecified)
• V-belts
• Various small parts
• Premium 2 1350 RP/RE and RE-L
• Sanding belt motor RP/RE: 15 kW
• Feed motor frequency-controlled RP/RE: 1.5 kW
• Height adjustment motor RP/RE: 0.75 kW
• Vacuum motor frequency-controlled RE-L: 2.2 kW
• Total connected load RP/RE: 17 kW
• Total connected load RE-L: 30 kW
• Operating voltage RP/RE: 400 V
• Maximum current consumption RP/RE: 36 A
• Maximum current consumption RE-L: 56 A
• Required slow-blow fuse minimum RP/RE: 40 A
• Required slow-blow fuse minimum RE-L: 63 A
• Cable cross-section reduced load RP/RE: 5x6 mm²
• Cable cross-section reduced load RE-L: 5x10 mm²
• Cable cross-section correct dimensioning RP/RE: 5x6 mm²
• Cable cross-section correct dimensioning RE-L: 5x10 mm²
• Extraction connection for 1st unit diameter RP/RE: 180 mm
• Extraction connection for 1st unit diameter RE-L: 180 mm
• Extraction connection for 2nd unit diameter RE-L: 180 mm
• Extraction connection for belt blow-off diameter RE-L: 150 mm
• Required total extraction connection diameter RP/RE: 200 mm
• Required total extraction connection diameter RE-L: 300 mm
• Air velocity at extraction openings RP/RE: 22 m/s
• Total air volume for dust extraction RP/RE: 2000 m³/h
• Total air volume for dust extraction RE-L: 5400 m³/h
Ljdpfsx D E I Ejx Agberi
• Negative pressure RP/RE: 880 Pa
• Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h
• Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h
• Operating pressure RP/RE: 7 bar
• Sanding belt length (all units) RP/RE: 2000 mm
• Sanding belt width (all units) RP/RE: 1350 mm
• Maximum workpiece width RP/RE: 1350 mm
• Minimum workpiece thickness RP/RE: 4 mm
• Maximum workpiece passage height RP/RE: 200 mm
• Working height including machine base RP/RE: 910 mm
• Feed speed range RP/RE: 3–15 m/min
• Total machine length RP/RE: 1690 mm
• Total machine length RE-L: 1850 mm
• Total machine width RP/RE: 1790 mm
• Machine height including base and extraction outlet RP/RE: 1950 mm
• Maximum machine height including base and extraction outlet RP/RE: 2150 mm
• Net weight approx. RP/RE: 2300 kg

Extra Information
Machine still under power