Winter service device / salt spreader

Kugelmann Salz und Sandstreuer Duplex Inox

Duplex Inox

KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL
made of V2A stainless steel

Container volume 1.8 m³
- 2 screw conveyors
- Spreader with spreading disc, 8 m spreading width (rustproof)
- K-Tronic 2 control system with flying cable harness
- Wet salt systems (technical data see below *)
- For moistening in the impeller of the spreading disc
- Automatic dry material reduction
- 2 side salt tanks and 1 center tank
- Tank capacity approx. 820 liters
- Stainless steel spreading disc, 8 m spreading width
- Screw couplings
- Cable separation
- Folding roof
- All-round beacon, halogen
- PVC skirt
- Work light
- Volumetric meter or weight meter of the control system as
- Spreading control
- Sign "Winter service"
- Drive via vehicle hydraulics

* Wet salt system mounted on the spreader
Wet salt system suitable for the above-mentioned spreader,
driven by a hydraulically operated gear pump in a separate
closed control circuit (with feedback) for maximum
dosing accuracy, even with low
application rates, stepless and percentage-
accurate dosing,
capacity, as described above, 820 liters

Standard equipment:
- Salt tanks on both outer sides, as well as under the container between the spreader compartments
- Level indicator or conveying control
- Connection for filling
- Hydraulically operated gear pump for dosing
- Filter unit
- Brine distributor
Lasdszf E Dvspfx Agdec
- Control system k-tronic 2
- Paint finish RAL 2011 - municipal orange
- Access ladder
- Electrical spreading control
- Electrical spreading pattern adjustment
- Mounting kit according to agreement and vehicle

Advantages of KUGELMANN mounted spreaders:

- Kugelmann screws always have 3 pitches
(patented)

- The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented)

- Daily application counter standard

- Extremely low construction and extremely low
center of gravity, resulting in significantly better vehicle
handling and loading of spreading material as well as visibility to
the rear

- Control systems are always interchangeable (data is stored on the slave)

- High level of in-house production

- High-pressure resistant hydraulic motors, even with full
pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the
hydraulic lines.)

Subject to change, printing errors, and prior sale. All information is provided without guarantee.
The sale takes place with the exclusion of any warranty.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.