Krones Variojet Rinser (2007)

Krones Rinser

Overview

This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed.

It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer.

Technical data

- Manufacturer: Krones
- Model: Variojet
- Year of manufacture: 2007
- Machine type: rotary rinser for glass bottles
- Output: up to 48,000 bottles per hour
- Bottle formats: 330, 400, 500, 580 and 650 ml glass
- Rinsing positions: 110
- Treatment stages: water rinsing, air blowing, gravity drainage
- Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20
- Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A
Pgjdjz Hai Tepfx Anket
- Operating hours: 44,485 h
- Dimensions: approx. 4.5 m across the carousel including the safety guarding

Equipment

- Rinser with carousel, bottle grippers and transparent safety doors
- Front table with infeed screw and starwheels
- Control panel with Krones iPanel
- Water and air supply manifold
- Domnick Hunter compressed-air dryer
- Change parts for 330, 400, 500, 580 and 650 ml bottles
- Water drip trays

Condition

Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed.

Availability

Available from late February / March 2027, after removal from the production line. Location: Poland.