Krauss Maffei KM650-4300 GX (2013)

KraussMaffei KM650-4300 GX

Machine KraussMaffei KM650-4300 GX

Clamping force kN: 6500

Clearance between tie bars ( h x v ) mm: 1110 x 960

Mould opening stroke mm: 1450

Mould height min. mm: 450

Mould height may. mm: 1000

Ejector stroke mm: 250

Screw diameter mm: 90 (mixing HPS-M)

L/D ratio: 20

Injection pressure bar: 1839

Stroke volume cm3: 2290

Control version: MC5

Screen text: Germany

Condition: Checked, ready to work



Equipment:

\- Anti-vibration levelling pads

\- BluePower - Servo pump drive for lower energy consumption

\- Wear resistant plasticizer, surcharge

\- BluePower - Complete insulation of plasticizing cylinder for lower energy
consumption

\- 2 x pneumatic valve on moving platen for blow function

\- 2 x pneumatic valve on fixed platen for blow function

\- Pneumatic cascade control, 4-fold for hotrunner

\- Hydraulic cascade control, 4-fold for hotrunner

\- Conveyor control

\- Mechanical robot interface according to EUROMAP 18

\- Hydr. actuated ejector plate including tapped holes and clearance holes in
the moving platen for ejector bolts

\- Hydraulic core pull system 2-fold on moving platen

\- Hydraulic core pull system 2-fold on fixed platen

\- Pneumatic core pull system 1-fold on moving platen

\- Pneumatic core pull system 1-fold on fixed platen

\- Pressure relief for hydraulic core pulls

\- Pressure relief for hydraulic cascade valves

\- 20 hotrunner control circuits

\- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE
socket 32 A)

\- Potential-free contact for signal "plasticizing" on socket HAN 3 A

\- Switch over to holding pressure depending on cavity pressure (Kistler)

\- Quality statistics

\- Chip card reading unit
Hfodpfxoy Apdqj Af Ejf

\- Graph display and analysis package with 10 graphs

\- Trend graphics

\- PV-closed loop control

\- Interface for production data consisting of 5 potential free contacts
inside the control cabinet

\- 3 free programmable in- and outputs in the control cabinet:



KraussMaffei Linear Robot LRX 350:

\- Fully integrated control

\- Horizontal stroke: 4000 mm

\- Vertical stroke (telescopic): 2000 mm

\- Demolding stroke: 1200 mm

\- Maximum payload: 35 kg