Cantilever rack

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Cantilever rack in painted version (RAL 7016 anthracite):

Scope of delivery:

4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth

12 cantilevers with 1,200 mm usable depth

Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length)

Fastening material (screws, nuts and washers)

- (*No paint damage!)

- (*No damaged components!)
- (*Reorder spare parts and extension possible at any time)

- (*Offer available in larger quantities: approx. 50 racks in stock)

Net price: €1,990.00 plus VAT

Detailed description:

- Stable steel construction made of IPE profiles (screw system)

- Surface painted in RAL 5010 (gentian blue)

- Rack height 4,200 mm
- Load capacity per stand 2,200 kg
- Base and cantilever arms with 1,200 mm usable depth
- Cantilever arms height adjustable in 100 mm increments
- 3 screwable cantilever arms per stand, standard (= 4 storage levels)
- Load capacity per cantilever arm 730 kg
- Including longitudinal and diagonal braces for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and load plates C4 in accordance with DIN standard
- Expert advice by telephone
- Made in Germany
- Short delivery time
- On-site collection possible

Our cantilever racks are manufactured exclusively in Germany.
Godemidyfepfx Abfobk

We offer reliable freight with registration before delivery.

The material is sensibly packed to enable easy unloading.

Delivery can take place in approx. 1 - 2 weeks after receipt of the order.

When installed outdoors, the load-bearing capacity is reduced by the wind and snow load.
The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained.
The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.