Dowel driving machine

Koch DB 80

KOCH Dowel Inserting Machine Type DL-80
Machine No.: A0005/6390
Workpiece Dimensions:
Workpiece length: 180 - 2500 mm
Workpiece width: 70 - 800 mm
Workpiece thickness: 12 - 40 mm

- with glue application and dowel insertion station
- with 1:1 glue pump
- 1 vibratory feeder with control mirror per side
Lajdpfsx Ez A Rox Afpsk
- lateral dowel hole air nozzles
- mechanical digital display for height adjustment
- PLC control
- machine bed with linear guides
1 x NC axis for positioning

Configuration of glue application and dowel insertion station:
6 single dowel tools per side
Dowel diameter: 8 mm
Dowel length: 35 mm
Dowel projection: 7-14 mm
Pitch: 32 mm
Minimum dowel center distance: 32 mm; maximum: 736 mm

Tolerances for wooden dowels:
Dowel length: +/- 1 mm
Dowel diameter: +0.1 / -0.2 mm

Electronic Glue Monitoring ELC
The monitoring device is installed before the glue valve.
With every working cycle (glue shot), the glue flow is measured.
If no glue is dispensed from an activated glue valve,
the machine interrupts its cycle and indicates the relevant glue valve
on the control cabinet.

12 x Electronic Glue Monitoring ELC,
one per glue valve
Flip-up belt extension
Workpiece alignment station in belt infeed
for minimum workpiece width of 70 mm, plus alignment for narrow parts

Electrical connection rating: 400 V, 50 Hz, 3 phase
Voltage fluctuation: max. +6 to -10%
Air connection: 7 bar
Extraction air speed: approx. 30 m/sec
Ambient temperature at installation site: min. 10° C (50° F), max. 40° C (100° F)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.