WasherKitzinger
Spiracon 100
Washer
Kitzinger
Spiracon 100
سال ساخت
۲۰۲۴
وضعیت
جدید
(کاملاً عملیاتی)
موقعیت
Neuenkirchen 

اطلاعات دستگاه
- نام دستگاه:
- Washer
- تولید کننده:
- Kitzinger
- مدل:
- Spiracon 100
- سال ساخت:
- ۲۰۲۴
- وضعیت:
- نو
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Parkstraße 4, 17039 Neuenkirchen, Deutschland

تماس بگیرید
جزئیات فنی
- طول کل:
- ۲٬۹۰۰ میلیمتر
- عرض کل:
- ۶۲۰ میلیمتر
- ارتفاع کل:
- ۱٬۵۰۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A22044208
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۲.۰۳.۱۴۰۵
توضیحات
for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
Dsdpoza Dvusfx Abmech
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
Dsdpoza Dvusfx Abmech
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2026
۱ آگهی آنلاین
ارسال درخواست
تلفن & فکس
+49 395 4... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






