Electrically heated stainless steel tankInox Behälter GmbH
EBB250RWP
Electrically heated stainless steel tank
Inox Behälter GmbH
EBB250RWP
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۶٬۱۷۰
وضعیت
جدید
موقعیت
Delmenhorst 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Electrically heated stainless steel tank
- تولید کننده:
- Inox Behälter GmbH
- مدل:
- EBB250RWP
- وضعیت:
- نو
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۶٬۱۷۰
- موقعیت:
- Steller Straße 65, 27755 Delmenhorst, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A21337707
- شماره مرجع:
- EBB250RWP
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۸.۱۲.۱۴۰۴
توضیحات
Factory-new electrically heated stainless steel mixing vessel with insulation and propeller agitator, including operating manual and CE declaration of conformity.
Model: EBB250RWP
Alternatively available with other agitator types and in different sizes.
Nkjdpfxjyngxns Ahusu
Capacity: 250L
Approx. dimensions: Ø 595mm x cylindrical height 900mm
Total height: 1240mm plus agitator motor
Material: 1.4301 stainless steel V2A
Surface finish: IIIc / 2B
Weld seams ground on the inside
Max. operating temperature: 110°C
Operating pressure vessel: ATM
-Upright design on casters
-Top: Hinged lid, half bolted, half hinged with removable stainless steel sheet grid as reach-in protection
-Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disk valve, EPDM seal
-Agitator flange connection on the top cover
-2x push handles
Propeller agitator:
Power: 0.37 kW
Speed: 1410 rpm
Operating voltage: 3PH 400V
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Model: EBB250RWP
Alternatively available with other agitator types and in different sizes.
Nkjdpfxjyngxns Ahusu
Capacity: 250L
Approx. dimensions: Ø 595mm x cylindrical height 900mm
Total height: 1240mm plus agitator motor
Material: 1.4301 stainless steel V2A
Surface finish: IIIc / 2B
Weld seams ground on the inside
Max. operating temperature: 110°C
Operating pressure vessel: ATM
-Upright design on casters
-Top: Hinged lid, half bolted, half hinged with removable stainless steel sheet grid as reach-in protection
-Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disk valve, EPDM seal
-Agitator flange connection on the top cover
-2x push handles
Propeller agitator:
Power: 0.37 kW
Speed: 1410 rpm
Operating voltage: 3PH 400V
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2016
ارسال درخواست
تلفن & فکس
+49 4221 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است










