Electrically heated stainless steel tank

Inox Behälter GmbH EBB1150RWP

Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity.
Type: EBB1150RWP

Also available with alternative agitators and in other sizes.

Volume: 1150L
Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm
External Ø: 1390mm
Total height: approx. 1300mm plus agitator drive
Material: 1.4301 / AISI304 stainless steel
Surface: IIIc/IIId / satin finish
Internal welds ground smooth
Max. operating temperature: 110°C
Max. operating pressure: atmospheric
- Upright design on four tubular legs with forklift channels
- Top: Central traverse with two hinged covers
- Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket
- Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding

Equipment:

1x Top traverse with two hinged cover halves, clamp function for the lid
Stainless steel grating below the hinged lid, bolted and removable
1x Agitator flange on the top
1x Inlet port DN50 DIN11851 on the top
1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket
1x nameplate

Propeller agitator for low-viscosity media
Power: 0.75 kW
Speed: 1410 rpm
Operating voltage: 3PH 400V
Kodpfxjw Dy D Do Agnjnc

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.