Heatable/coolable agitator tank

Inox Behälter GmbH CILC3000TPRWA

Used heatable/coolable agitator tank with anchor agitator
Type: CILC3000TPRWA

Gsdpswfnpqsfx Adheuk
Item number: 10865

Last intended use: Food

Volume: Approx. 3150L
Type: Upright design on four height-adjustable feet
Design: Min. 2mm wall thickness
Material (wetted parts): 1.4301 stainless steel
Surface: Satin finish on the outside, BA (IIId) on the inside
Internal weld seams: Ground
Operating pressure: Atmospheric
Thermoplate operating pressure: Max. 1.8 bar
Operating temperature: Max. +95°C
Top plate: Central cross member with two hinged lid halves
Bottom plate: Conical bottom with central outlet

Tank dimensions:
Tank diameter: 1600mm
Cylinder height: 1500mm
Total height: 2700mm
Feet height: 580mm

Equipment:
-Thermoplate (double jacket) for heating/cooling, H=1000mm, around the cylinder. Part of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar
-Thermoplate (double jacket) for heating/cooling on the bottom of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar
-1x hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in a 90° open position)
-2x metal grates below the hinged lid as anti-soap protection, screwed, removable
-Cross braces welded between the feet
-1x agitator flange connection
-1x spare connection DN50 DIN11851 on the top plate with blind cap
-Outlet DN50 DIN11851
Handle extends to the front, adapter shaft, guide plate
-1x nameplate

Agitator:
Anchor agitator
Max. viscosity: 20,000 mPas
Manufacturer: Schwarzer Rührtechnik GmbH
Type: SRTFGH/1.5-10
Power: 1.5 kW
Speed: 0-11 rpm
Operating voltage: 3PH 400 V
Material in contact with product: 1.4301 stainless steel

-Motor and gearbox manufactured by Getriebebau NORD
-Gearbox with food-grade oil filling
-Solid agitator shaft with double bearings in the gearbox
-Agitator shaft balanced for smooth running across the speed range
-Anchor agitator made of 60x60 square tube, welded design
-Stainless steel flange with EPDM V-ring seal

Agitator control:
CEE plug-in switch on the tank with on/off switch, phase inverter, zero-voltage release, and emergency stop, pre-wired

Continuous speed control of the agitator motor via a compact, external frequency converter, manufactured by Optidrive
Operating voltage: 3PH 400V

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.