Automatic drawer slide insertion line

Ingenjörsfirma Evert Johansson AB BLA-B41 + BLA-B28 + Screwdriver 3RL

We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production):
BLA - B41, manufactured 2006/2007 (Sweden)
BLA - B28, manufactured 2006 (Sweden)
Screwdriver 3RL, manufactured 2018 (Lithuania)
Robot
TECHNICAL SPECIFICATIONS
Inserting of Drawer Slides
Fitting machine BLA-B41 – pos. 1
Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides.
The fitting machine is designed for following sizes of material:
Deep: 300–600 mm, servocontrolled adjustment
Height: 400–1500 mm, servocontrolled adjustment
Thickness: 16 mm
Dimensions
Machine length: 4100 mm
Pass-through height: 900 mm
Screwdriver equipment
Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws.
Ljdjy T Nfijpfx Akrsrl
A suiting screw is the type 84 FSX
Magazine units
2 magazine units designed for left drawer slide
2 magazine units designed for right drawer slide
· Each magazine contains approximately 40 drawer slides.
· The length of the slides are 450 mm and the width 21.5 mm.
Buffer conveyor TPB – pos. 2
Driven roller conveyor
Total length: 2150 mm
Other specifications are the same as for pos. 3 above.
Buffer conveyor TPB – pos. 3
Driven roller conveyor
Total length: 2450 mm
Roll length: 600 mm (620 mm inside conveyor frame)
Roll pitch: 150 mm
Roll type: Ø50 mm steel, coated with thermoplastic rubber
Speed: 0.78 m/sec. at 50 Hz (frequency controlled)
Height: 900 mm
Returning Conveyor System TPT-US – pos. 4
Sideway section with four belts
Speed: 0.5 m/sec. at 50 Hz (frequency controlled)
Driven roller conveyor
Total length: 8900 mm
Roll length: 600 mm (620 mm inside conveyor frame)
Roll pitch: 150 mm
Roll type: Ø50 mm steel, coated with thermoplastic rubber
Speed: 0.50 m/sec. at 50 Hz
Height: 900 mm
Additional specifications
Sound pressure level
Lower than 70 dB(A)
Connection facts electrical
With reference to the electrical drawings
Connection facts pneumatic
0.63 MPa (6.3 bar), ½”