IMA BIMA 310V 120/600 CNC machining center (2004)

IMA BIMA 310V 120/600

Machining area:
- in the X direction without gluing 6000 mm
- in the X direction with gluing 5000 mm
- in the Y direction 1200 mm
- in the Y direction with main spindle + center distance 20 mm 1300 mm

max. workpiece height above
- top edge of suction plate Z1 100 mm
- max. workpiece thickness Z2, dependent on equipment/application

Work table height: approx. 950 mm

1 main spindle with pneumatic feed stroke
- drive power: 12 kW in S-1 operation
- tool holder: HSK F63, taper diameter = 38 mm
- tool change: automatic
- change force: 11000 N
- tool weight: max. 6 kg
- direction of rotation: clockwise/counterclockwise, programmable
- speed range: continuously variable 1500 - 24000 rpm, programmable
- drive: frequency-controlled three-phase motor
- spindle lubrication: single grease lubrication
- spindle cooling: water cooling

1 CNC axis rotating 360 degrees

1 vertical drilling unit S21

Machine table consists of:
- 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program
- 6 sets of suction plates consisting of a total of
- 6 suction plates 114 x 159 x 100 mm
- 6 suction plates 125 x 75 x 100 mm
- The support arms and suction plates can be individually positioned according to the corresponding workpiece size.

Changeover area:
- without pendulum machining, without gluing: X = 2 x 2900 mm
- free space in the middle: X = 200 mm
- without pendulum machining, with gluing: X = 2 x 2150 mm
- free space in the middle: X = 700 mm
- with pendulum machining, without gluing: X = 2 x 2400 mm
- free space in the middle: X = 1200 mm
- with pendulum machining, with gluing: X = 2 x 1700 mm
- free space in the middle: X = 1600 mm

Feed drive system

Rapid traverse rates:
- X-axis 100 m/min
Dwsdezupibepfx Aa Isc
- Z-axis 25 m/min

Air pressure: 6 bar

Tool changer magazine with 18 positions

Tool coding: position-coded
Tool weight: max. 6 kg
Tool length: max. 150 mm
Tool diameter: max. 100 mm when fully loaded
max. 150 mm with free adjacent positions or nesting

Central connection for extraction

Mains voltage: 3/N/PE, 400/230 V, 50 Hz
1 vacuum pump 100 m3/h

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.