4-Axis Machining Center

IMA BIMA 300

4-Axis Machining Center IMA BIMA 300
Year of Production: 2009
Technical Condition: Very good

Technical Data:

* Work Table: 4,300 × 1,250 mm
* Supports and Suction Cups: 8 supports, total 24 suction cups
* Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm
* Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free)
* Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm
* Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket
* Vacuum Pumps: 2 × 90 m³/h
* Protective Mats: operation in alternating mode, front access
* Software: IMAWOP installed on the machine + 1 office license
* Emergency Power Supply (UPS): computer power backup approx. 10 minutes
* Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C
* Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm
* Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min
* Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram
* Weight: approx. 5,500 kg
* Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer
* Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz
* Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner)

CNC Control:

* System: ICOS OPEN 321 (Polish language version)
* Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes
* Selected IMAWOP Functions:

* Operation selection: drilling, milling, grooves
Dsdpfx Afsw R S Dnsnecn
* Graphic updates after corrections
* Drilling time optimization
* Graphical positioning of suction cups
* Conditional and formula-based programming
* Technological and tool databases
* Alphanumeric names/descriptions up to 28 characters
* Subprograms, manual input of machining sequences
* Error/alert messages
* Acceleration/deceleration control (accuracy 0.001 mm)
* Automatic zeroing
* Corrections from portable console

Additional: IMAWOP machining program