IMA BIMA/300/125/530 4-axis CNC machining center (2012)

IMA BIMA/300/125/530

- Machining area: 5300x1400 mm
- Main spindle replaced 3 years ago
- 18-position tool changer

Technical data
Machining area
- In the X direction: 5300 mm
- In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm
- In the Y direction with drilling unit: (all vertical drills) 890 mm

- Single-position machining: X = 2 x 2550 mm
- Free space in the center: X = 200 mm

- Alternating field machining: X = 2 x 2250 mm
- Free space in the center: 800 mm

1 automatic tool/adapter changer magazine
- Arrangement: mounted on the support, moving in the X direction
- Disc changer with 18 magazine positions

Guidance system
- All axes are equipped with pre-tensioned, surface-hardened precision roller guides.

Central lubrication
- Manual central lubrication for all main axis linear guides and Z ball screw.

1 vacuum pump, 90 m3/h

Console table consisting of:
- 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction
- 10 adjustable support arms in the X direction, each with a rear stop
- All stops are controlled by the program
- The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses.
Godpszuw Rtefx Aqpjuh
- 8 smooth support rails, automatically retractable
- 2 push buttons for the workpiece clamping/releasing function

Additional 2nd vacuum pump, 90 m3/h

1 additional central stop row, for centering workpieces

Chip conveyor

1 main spindle
- Drive power: 10.0 kW in S-6 operation
- 7.5 kW in S-1 operation
- Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893
- Speed range: infinitely variable RPM, programmable

1 centrally integrated CNC axis, rotating 360 degrees
- for all adapter units, with torque support on the main spindle and pneumatic interface

1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter
- Horizontal drilling units with 2 outputs each

Attachment unit for a dado cutter
- Swivel range: 0 or 90°

Control system ICOS CNC
Modern, powerful PC-based control system with:
- User-friendly interface with Windows standards
- Trajectory control of all servo axes
- Job list / order processing
- IMA backup and recovery system on two hard drives
- Uninterruptible power supply (UPS)

IMAWOP software package
- for dialog-oriented creation of CNC machining programs
- - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.