Hydraulic pressHydraulic heavy press
2000 tons D2243
Hydraulic press
Hydraulic heavy press
2000 tons D2243
VB مالیات بر ارزش افزوده قابل اعلام نیست
€۱۱۰٬۰۰۰
سال ساخت
۱۹۷۸
وضعیت
کارکرده
موقعیت
Chișinău 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Hydraulic press
- تولید کننده:
- Hydraulic heavy press
- مدل:
- 2000 tons D2243
- سال ساخت:
- ۱۹۷۸
- وضعیت:
- خوب (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB مالیات بر ارزش افزوده قابل اعلام نیست
€۱۱۰٬۰۰۰
- موقعیت:
- WWCP+H7 Кишинев, Молдова
تماس بگیرید
جزئیات فنی
- ارتفاع کل:
- ۷٬۹۰۰ میلیمتر
- عرض کل:
- ۵٬۷۵۰ میلیمتر
- طول کل:
- ۷٬۰۰۰ میلیمتر
- نیروی پرس:
- ۲٬۰۰۰ t
- عرض میز:
- ۱٬۶۵۰ میلیمتر
- طول میز:
- ۲٬۰۰۰ میلیمتر
- وزن کل:
- ۱۴۴٬۵۰۰ کیلوگرم
- جدول فاصله تا پیستون:
- ۲٬۴۰۰ میلیمتر
- تجهیزات:
- مستندات / راهنما
جزئیات پیشنهاد
- شناسه آگهی:
- A19708131
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۵.۰۶.۱۴۰۴
توضیحات
2000 tons Composite press hydraulic (isothermal)
Located: Balti city (postal code: MD-3100), Republic of Moldova (European region)
The press is connected and 100% complete.
-----
Manufacturer: Dnepropress (Ukraine)
Nominal force: 2000 tons
Slide stroke: 1400 mm
Shut height (distance between plates): 2400 mm
Table size(width/length): 1650×2000 mm
Overall machine dimensions: 7000×5750×7900 mm
Main motor power: 62 kW
Press weight: 145 tons
YOM: 1986
The press is connected
For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal.
The press is equipped with a sliding table.
- Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product;
- Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet;
Iisdpew Hridefx Acyjh
- Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds;
- Sheet stamping and sheet forming processes.
The press has the following working and structural units and assemblies:
- Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press.
- Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides.
- Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position.
- Ejector mounted on the lower console (table).
- Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering.
- Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump.
- Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame.
The D 2243 press is operated via a remote control panel.
27/08/2025
Located: Balti city (postal code: MD-3100), Republic of Moldova (European region)
The press is connected and 100% complete.
-----
Manufacturer: Dnepropress (Ukraine)
Nominal force: 2000 tons
Slide stroke: 1400 mm
Shut height (distance between plates): 2400 mm
Table size(width/length): 1650×2000 mm
Overall machine dimensions: 7000×5750×7900 mm
Main motor power: 62 kW
Press weight: 145 tons
YOM: 1986
The press is connected
For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal.
The press is equipped with a sliding table.
- Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product;
- Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet;
Iisdpew Hridefx Acyjh
- Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds;
- Sheet stamping and sheet forming processes.
The press has the following working and structural units and assemblies:
- Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press.
- Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides.
- Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position.
- Ejector mounted on the lower console (table).
- Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering.
- Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump.
- Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame.
The D 2243 press is operated via a remote control panel.
27/08/2025
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2025
ارسال درخواست
تلفن & فکس
+39 331 7... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است