Hydraulic winch without valve

HOLZHAEUER HAW1700

Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier.
- Pull the firewood to the log splitter and set it up
- pull logs on trailers
- Pull out rootstocks and trees
- As an attachment winch on back cranes and small excavators
- As winch for small tractors and narrow track tractors
A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need.

Maximum working pressure: 225 bar peak
Continuous operating pressure: 175 bar
Displacement: 400 ccm
Torque at 225 bar: 870 Nm peak
Gcodsdf Ua Ropfx Adhsa
Torque in continuous operation: 380 Nm
Maximum tractive force: 1700 kg
Weight: 49 kg
rope speed: 47 m/min at 60 L/min hydraulic oil
Colour: red
Dimensions:
Length: 500 mm
Length with pendulum: 570 mm
width front: 120 mm
Width rear: 180 mm
bearing width: + 30 mm
Motor width: + 200 mm
Height: 250 mm
Item number: HAW1700
NOTE: Figure 1 is marked with m

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.