Hydraulic winch manual valve

Holzhäuer HAW1700-HV

Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks.

- Pull and position firewood for the log splitter
- Pull logs onto trailers
- Pull out tree stumps and trees
- As an attachment winch for forestry cranes and small excavators
- As a winch for small tractors and narrow-gauge tractors

A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force.

Maximum working pressure: 225 bar peak
Continuous operating pressure: 175 bar
Displacement: 400 ccm
Nwsdpfx Aodf Ud Sjhpok
Torque at 225 bar: 870 Nm peak
Torque in continuous operation: 380 Nm
Maximum pulling force: 1700 kg
Weight: 49 kg
Cable speed: 47 m/min at 60 l/min of hydraulic oil
Color: red

Dimensions:
Length: 500 mm
Length with swivel: 570 mm
Front width: 120 mm
Rear width: 180 mm
Bearing width: + 30 mm
Motor width: + 200 mm
Height: 250 mm

The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor.

Article number: HAW1700-HV

NOTE: Figures 2, 3, and 4 are examples of mounting options!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.