Slot boring machine Dowel boring machine

HOFFMANN GÖTZINGER mit Lieferung Typ HT 200 schwenkbar TOP ZUSTAND

HOFFMANN HT 200 Dowel and Slot Drilling Machine

In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear.
It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter.
Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks.
With workpiece support rests on the left and right sides, which are pivotable and have a support roller.
The machine has a chassis.
With 2 angle stops on the machine table for left and right.
The clamping arms are reversible and adjustable.
380V, 1400 and 1800W through the 2 speed ranges.
1400 and 2850 rpm.
Year of manufacture: 1994
Weight: approx. 280 kg
With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints.
Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications.
The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers.
The 2 speed ranges allow drills with large diameters to be used without overheating during drilling.
Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical.
The machine requires a compressed air connection of 6 bar (the air consumption is very low).
Right-hand rotation.
Nlsdpfx Abeyy Rtzemsf
Mills and drills very well and cleanly.
Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal.
The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately.
Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right.
Working travel in width: max. 330mm
The max. borehole height is 90mm.
The max. borehole depth is 200mm with stop.
The max. workpiece height is 150mm.
Everything functions perfectly.
Comes with manual.
We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request.
The machine table is 1100mm wide and 250mm deep.
Professional equipment, not cheap hardware store junk.
You can start working with the machine immediately.
Very stable and durable construction.
The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.