Strip processing line - decoiler and straightening machine, uncoiler for coil material, sheet metal

HMS 450 x 6

Coil line – Uncoiler and Leveler
Year of construction: 1991
Coil width: 50 to 450 mm
Sheet thickness with inactive leveler: 6 mm
Sheet thickness with active leveler: 2 mm
- Very good condition and comprehensive operating instructions
Space requirement of the entire system L x W: approx. 7000 x 3000 mm
Weight of the entire system: approx. 11 tons
Good condition

Leveler HMS Type RS 47-04/1, Machine No.
Coil width, nominal width: 400 mm
Coil width, maximum passage width: max. 455 mm
Coil thickness at 400 mm width: max. 1.5 mm (for steel)
Coil thickness at 400 mm width: max. 2 mm (for copper)
Speed: max. 40 m/min
Number of leveling rolls: 7 pieces
Leveling roll diameter: Ø 40 mm
Number of tension rolls: 2 pieces
Tension roll diameter: Ø 80 mm
Infeed height, passage height: 1500 mm
- Leveling rolls hardened, ground, and hard chrome-plated, with central support
- Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment
Dsdpsif Sg Ssfx Acrecp
- Manual adjustment of the leveling rolls
- Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller
- Adjustable lateral coil guide
- All leveling rolls driven via distributor gearboxes with universal joints
- Both tension rolls driven via gearboxes with universal joints
- Frequency-controlled drive via geared motors
- Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle
- Ultrasonic loop control
Transport dimensions L x W x H: 3600 x 2200 x 2200 mm
Weight: approx. 4 tons

Uncoiler HMS Type BA 1.5-06/80, Machine No.
Coil weight: max. 8000 kg
Coil outer diameter: max. 1600 mm (with loading table)
Coil outer diameter: max. 2000 mm (without loading table)
Diameter of the coil inlet disc: Ø 1700 mm
Coil inner diameter, spreading range: 460-520 mm
Coil width, nominal width: max. 630 mm
Width of the spreading jaws: 750 mm
Height of the uncoiler arbor above the base plate: 1500 mm
- Drive of the uncoiler arbor via hydraulic motor and gear
- Pneumatic retarder brake on the uncoiler arbor TWINFLEX
- Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system
- Hydraulic pressure arm with hydraulically driven double rocker roller
- Coil loading table with 12 tons lifting capacity and 300 mm stroke
- Uncoiler in an above-floor running frame with motorized transverse travel drive
Transport dimensions L x W x H: 3500 x 1900 x 2500 mm
Weight: approx. 5 tons

Central hydraulic unit, separate
Tank capacity: 350 liters
Drive power: 18.5 kW
- Drive motor with 2 pumps REXROTH (tandem pump)
- Oil cooler as an air heat exchanger with fan motor
Transport dimensions L x W x H: 1600 x 850 x 1450 mm
Weight: approx. 800 kg

Electrical cabinet, separate
- All cable connections are made via Harting connectors
Transport dimensions L x W x H: 2800 x 500 x 2250 mm
Weight: approx. 800 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.