Double side sanding machine

Hess Expert

Number of sanding units: 4 pcs
Sanding width: 190 mm
Lsdm U H Nfet Tqy Eofjrw
Max. sanding height: 4–180 mm
Weight: 4200 kg
Hess Expert 4-Belt Single Wood Sanding Machine

Ø Sanding from below/above
Ø With 2 offset sanding units each (below and above)
Ø Sanding units (below and above) arranged in series according to the planing principle
Ø Pre-sanding with coarse grit (calibration)
Ø Fine sanding with fine grit (finishing)
Ø Central motorized height adjustment of the lower sanding units
Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units
Ø Oscillating use of sanding belts (during the sanding process)
Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums
Ø Oxide-ceramic sanding shoe for:
- precise surface geometry
- no need for readjustment
- permanent dimensional accuracy
- completely maintenance- and wear-free

Basic structure:
Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping.

Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages.

Bsdjxzbdkspfx Ag Iodk
Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load.
The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon.

Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation.
Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts.

Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment.

Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt.

The Feeding mats have been recently changed