K1 joinery machine

Hans Hundegger AG K1

Equipment:
01_ Cross-sections 20 x 60 to 300 x 450 mm
02_ Feed conveyor, transverse, 5 strands, 2.2 m
03_ Undercutting miter saw
04_ Universal milling machine
----> Roller cutter
----> Finger cutter
05_ Combination support for vertically operating tools
----> 1x Drilling machine
----> 1x Finger milling machine
06_ Combination support for horizontally operating tools
----> 2x Drilling machine
----> 1x Grooving machine
07_ Beam turning station, fully automatic

Machine installation:
08_ Substrate, foundation:
----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement)
This should be level and suitable for anchoring.
09_ Power requirements, type, quality, quantity:
09.1_ Electrical:
----> Voltage: 400/230V, 3/N/PE
Rcsdpfx Alozv Tt Homef
----> Fuse rating: 3 x 63A
----> Frequency: 50 Hz
----> Peak demand: 15 kW
The mains voltage must be constant and uninterrupted within the specified tolerance range!
09.2_ Compressed air:
----> Flow rate: V < 600 l/min
----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar

Important:
The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.