Window production centre

GUBISCH EST-H 2000_IV68/78/88

Tenoning spindle 1 St
Number of milling agregates 3 St.
Spindle diameter 50 mm
weight ca 7.500 kg
Gubisch type EST-H 2000/2
-----
Machine still in use and can be inspected!

Manufacturer's description:
-----
single-sided angle combination for window and
door production consisting of tenoning and
slotting machine, angle transfer and trimming machine

cross-cut saw:
-----
P = 3 kW
U = 3000-1
Saw diameter: 400 mm
Flange diameter: 80 mm
Adjustment: horizontal: manually adjustable,
readable via mechanical digital display

Length stop LAS
-----
Adjustment: manual
Length: extended to 3.2 m

Slotting unit (cross processing)
-----
P = 9.2 kW
U = max. 4500 but depends on your
tools and is adjusted accordingly
Clamping height: 300 mm
Useful height: 300 mm
Shaft diameter: 50 mm
Largest tool diameter: 400 mm max., 240 mm min.
Adjustment: vertical
Gjdpfxexmk Dws Acyouh
Adjustment range: vertical 210 mm under table
Number of tools: 3 tool sets of 100 mm each
provided by customer 0-height 10 mm

shortest workpiece: 320 mm + tenon
narrowest workpiece: 48 mm
widest workpiece: 170 mm

1st profile spindle
-----
Spindle position: vertical right
Function: profile production and automatic synchronization
P = 9.2 kW
U = 6000 rpm
Clamping height: 100 mm
Effective height: 100 mm
Diameter: 50 mm
Flight circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, tool 0-height 10 mm
Number of tools: 1 a 100 mm Clamping length max.

2nd profile spindle
-----
Spindle position: vertical right
Function: profile production
P = 9.2 kW
U = 6000 rpm
Clamping height: 300 mm
Useful height: 300 mm
Diameter: 50 mm
Flight circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm

3rd profile spindle
-----
Spindle position: vertical right
Function: profile production
P = 9.2 kW
U = 6000 rpm
Clamping height: 300 mm
Effective height: 300 mm
Diameter: 50 mm
Flying circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm
Number of tools: 3 a 100 mm clamping length max.

4th profile spindle (glazing bead sawing unit)
-----
Spindle position: horizontal top, right
P = 3.0 kW
U = 3000 rpm
Flying circle diameter: 250 mm
Clamping flange holder: 60 mm diameter
Hydraulic adjustment: automatic up/down, forwards/backwards for 1 basic height
and 1 basic depth

Further technical details
-----

Clamping table Slotting unit
-----
On ball guide bush and roller guides
Manual swivel range: 60 degrees in both directions

Speeds: 0 - 28 m/min. infinitely variable
4 speed ranges fast feed in front of slotting unit
slow feed in cutting area adjustable
fast feed for transfer
fast return

Counter beam: Counter beam changes automatically
with spindle stroke

Transfer type to profile area: automatic

Operating mode: Single part production, frame-by-frame
production and series production possible


Longitudinal profiling
-----
Width adjustment: against man. Turret stops
Differences of up to 30 mm are absorbed by the pneumatic
spring-loaded fence
Range: 48 - 170 ...