FGT Graphic Machinery - Converting

GM FB 3300 - Hotfoil/Screen etc.

GM - FB330 Finishing Solution
Year of Manufacture: 2018
_____
Machine Specifications and Equipment:
HIGH-PRECISION FINISHING MACHINE

 Max. web width 330 mm
 Min. web width 50 mm
 FLAT BED HOT FLOW PRESS UNIT
Djdpevvmnnofx Ab Aoki
 Speed 6000/H embossing or 10-15m/min
 Web width 110mm - 330mm
 Substrates 50-200um
 Label paper 60-120 g.
 UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper
 All other substrates must be tested by GM
 Polymer (blind embossing ONLY)
 Sheet thickness: 5-10mm. 7mm is standard
 Backing plate, self-adhesive rubber (1-3mm). SH65
 Plate size and type 304.8 x 330mm. 5-9mm magnesium
 Plate pressure 30 tons
 Foil feed transverse and longitudinal direction (rotating tower)
 Temperature contr. 80°-130°C
 Heating time 20 min.

 SCREEN PRINTING UNIT
 Speed 4000/h overlays or 5-15 m/min.
 Web width 110mm - 330mm
 Frame size 660mm x 500mm
 Frame type 30mm x 30mm aluminum frame
 Print area 330mm (length) x 330mm (width)

MACHINE:

Fully servo-driven line with web tension control.
Modular design can be equipped with e.g. hot air drying and inkjet, etc.
Modern single-sided housing for easy retraction and maintenance.
1. UNWINDER
2. WEB EDGE CONTROL
3. FLAT BED SHEET IMPACT UNIT
30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality
Servo Drive System ensures consistent pressure and embossing time at all speeds

Integrated foil saving function
Swivelling foil tower can be used on both sides
A single module for blind embossing and/or flatbed hot foil
The system uses magnesium, brass/sheet metal or polymer plates
Plates can be changed while hot using a carriage system
4. SCREEN PRINTING UNIT
Servo register system for print marks or optional label distance sensor
Pneumatic squeegee with servo movement
5. REWINDER
Rewinder for roll diameters of Ø600mm (depending on job/material)
Electronic control of speed, position and torque
Automatic control of the rewind tension for every speed and all rewind diameters

Pneumatically replaceable rewind shaft Ø 76mm
Inner and outer winding

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.